Sculpfun iCube 3W Laser Engraver with Smoke Filter Temperature Alarm
-
iPad
$249.00
♦ 3W Ultra-fine Laser: iCube uses the 3W diode laser with 0.02mm ultra fine laser focus. It has super fine engraving ability which can present high definition engraving image. This laser engraver is suitable for engraving detailed objects and can cut colored paper and create three-dimensional paper works.
♦ High-Speed Engraving: iCube 3W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.
♦ With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.
♦ Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with the BT function or Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.
♦ Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.
♦ Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.
♦ Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 130x130mm which can meet your various engraving demands.
♦ Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.
Specification:
Fan Speed: 5000RPM
Temperature Sensor: 45℃ Trigger
BT: 4.2
Wi-Fi: 2.4Ghz
Wavelength: 455nm
Engraving Area: 130x130mm
Laser Head Power: 3W
Image Format: JPEG/BMP/TIF/GIF etc.
Laser Spot: 0.02mm
Working Voltage: 110-240V AC, 50/60Hz
Working Current: 12V 5A
Input Power: 60W
Optimal Focusing Distance: 40mm
Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux
Operation Application Software:
Computer: LightBurn/LaserGRBL
Mobile Phone: Sculpfun APP
Product Weight: 3.2KG
Product Size(LWH): 262x300x226mm
Package Weight: 4.75KG/10.4LB
Package Size: 318x282x360mm/12.5x11.1x14.1in
Some Important Tips:
1: About the Engraving Materials:
Note that any specular reflective objects can not be engraved, otherwise the laser reflection will damage the laser head.
2: About the smoke filter:
A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect.
3: About the laser lens:
A free lens is attached in the package with purchasing, which also can be ordered separately.
Packing List:
1 x Laser Engraver
1 x U-Shaped Shield
1 x Metal Plate
1 x Laser Head
1 x Power Adapter
1 x Power Cable
1 x Type-C Data Cable
1 x Cotton Filter Set
1 x Lens Repair Kit
1 x Goggle
1 x Basswood Board
1 x MDF
1 x Installation Instruction
Precautions:
●Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if you're not around.
●Please refer to the user manual for detailed machine instructions and parameter settings.
●Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed.
●Do not touch the laser with your hands, or it may burn your hands.
●Please avoid strong impact on the machine.
●Children under 14 are not allowed to use this product and children over 14 need adult supervision.
●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser.
-
X***
11-12-2024This product is exactly what I was looking for. It’s durable, practical, and very easy to use. A great buy!
-
J***
06-12-2024Very good product, I will buy again
-
I***
05-12-2024This product is exactly what I was looking for. It’s durable, practical, and very easy to use. A great buy!
-
Q***
03-12-2024Excellent product!
-
T***
02-12-2024Highly recommend this product! It’s durable, reliable, and works perfectly for my needs. I’m very happy with my purchase.
-
D***
30-11-2024I couldn't be happier with this purchase! It works exactly as advertised and has made my life so much easier.
-
M***
29-11-2024Nice product, looking forward to other products.
-
V***
26-11-2024Highly recommend this product! It’s durable, reliable, and works perfectly for my needs. I’m very happy with my purchase.
-
B***
23-11-2024The product is decent. It performs well, but there are a few aspects I think could be improved. Overall, it’s a good option for the price.
-
H***
13-11-2024This product is okay.
-
Q***
04-11-2024I’m very impressed with the performance of this product. It’s efficient, easy to use, and exactly what I needed.
-
T***
03-11-2024The service is very good, I like it very much
-
M***
10-01-2024This Sculpfun iCube 3W engraving machine is very good, it is small in size, does not take up space, and can be carried at any time. Ultra-fine engraving capability, the engraving image is very clear. This laser engraving machine is perfect for engraving detailed objects. Equipped with a smoke filter, I don’t have to worry about smoke emissions at all. I can operate it easily and safely. This design is great. <o
-
W***
10-01-2024The packaging of this laser equipment is very solid, the product quality is excellent, the structure is sturdy, and the price is cheap. It is worth buying for beginners!
-
H***
01-01-2024This laser engraving machine is exquisite, the product is good and well made. There is very little noise during work, so you don’t have to worry about disturbing your family even if you use it at home. <o
Related products
Creality Official Air Assist Kit for Laser Falcon 10W Laser Cutter and Engraver Pump Air Compressor
5Pcs Creality CR Laser Falcon Protective Lens Suitable for Creality Falcon Laser Module 5W/10W
Algolaser 30L Air Pump ALAP-30L1.0 Air Assist Auxiliary Laser Engraver Accessory
LONGER Lightburn Camera High 5MP Positioning and Recording 740x560mm Photography Range
Creality Falcon Smoke Purifier Filter Replacement 3in1 Design for Efficient Purify Up to 99.97% Purification Rate
