ATOMSTACK X20 Pro 20W Laser Engraver with Two Trees 740x700x400mm Protective Box and 400x400mm Honeycomb Working Table
-
iPad
$249.00
Eye Protection Design:The panoramic filter protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you can also watch laser engraving without wear goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
Easy Installation:The all-aluminum alloy anodized structure design makes the machine more durable, and the assembly can generally be completed within 20-30 minutes.
Super High Power:World's first 20W optical power laser engraver. The laser output power soars up with the latest generation of four 6W laser coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only one pass, and even cut the 0.05mm thick stainless steel sheet.
Upgrade Air Assist Kit:The cutting capacity is greatly improved, as well as the cutting accuracy and quality is optimized to a considerable extent.
Upgraded Laser:No need to adjust the focus before engraving. The focusing spot area of the new laser is only 1/3 of other ordinary lasers. Combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
Precise Scale Lines Axis:There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 400x400mm large area engraving interval can meet your various engraving needs.
Wide Compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/ 7 /8 / XP / 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
More Function:Uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable. Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer. The laser sintering temperature is up to 2400℃.
♦ Eyes Protection: The protective part of laser engraver cover glasses is made of double-layer PVC material, which can reduce the blue light produced by laser engraving and protect your eyes.
♦ Smoke Vent Design: Connect the 7. 5cm air outlet and the exhaust fan with a pipe to discharge smoke and odors (Note: a retractable 300cm long pipe is attached)
♦ Water Resistant: Not only is this laser enclosure fireproof, but it is also highly waterproof to prevent the laser engraver from getting wet with water.
♦ Fireproof Material: The laser engraver enclosure is made of high quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures.
Better Tool for Cutting and Engraving: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work.
Double Protection: Honeycomb board adopts scientific and reasonable honeycomb height design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage.
Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Easier to judge whether cutting through. You don’t need to calculate the number of cuts, just keep repeating cutting until the bottom glows, which means the material has been cut through.
Wide Compatibility: 400*400mm size honeycomb board can be suitable for various mature laser engraving machines.
High-quality: Made of durable metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness.
Specification:
Model: ATOMSTACK X20 PRO
Recommend Print Size: 400x400mm
Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective, Electroplating layer and paint surface layer metal, 304 mirror stainless steel, , ceramics, cotton cloth, slate;
Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Machine Power: 130W
Laser electric power: 90W
Laser output power: 20-21W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data transmission method: USB connection.
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Model: TWO TREES Laser Engraver Enclosure
Material: double-sided silicone coated plexiglas fiber
Size: 740x700x400mm
Model: Laser Engraver Honeycomb Working Table
Size: 400x400
Material: Aluminum Alloy
Product Thickness: 22mm
Packing List:
1 x Air Assist Accessory
1 x Mounting Screw
1 x Tool Kit
4 x Foot Pad Foam
1 x Film
3 x Acrylic Sheet
3 x Wood Chips
10 x Wire Tie
1 x Desiccant
1 x Brush
1 x Clean Cloth
1 x Card Reader
1 x TF Card
1 x Power Adapter
1 x Instruction
1 x Data Line
1 x Touch Screen Components
1 x High Definition Multimedia Interface Cable
1 x Laser Module
1 x Cutting Pad
1 x x Axis Assembly
1 x y Axis Left Profile
1 x y Axis Right Profile
1 x Profile On The Base
1 x Under The Base Profile
3 x Foot Bracket
1 x Engraving machine protective cover
8 x Tube A 350mm
8 x Tube B 325mm
4 x Tube C 360mm
10 x 3 way connector
10 x 2 way connector
1 x Fan power cable
1 x Fan
1 x Throat hoop
1 x Air guide
1 x Exhaust pipe
1 x Screw kit
1 x Tool Kit
1 x Honeycomb Panel
1 x 400x400mm metal Desktop Protection Board
-
B***
10-12-2024The product is decent. It performs well, but there are a few aspects I think could be improved. Overall, it’s a good option for the price.
-
B***
08-12-2024This product is excellent! It meets all of my expectations and works just as described. I’m very satisfied with the quality and performance. Highly recommend it to others!
-
X***
07-12-2024I absolutely love this product! exactly what i need.
-
S***
28-11-2024Amazing product! The quality is fantastic, and it has exceeded all of my expectations. Would definitely buy again.
-
Q***
28-11-2024Very good product, I like it very much
-
X***
25-11-2024I couldn't be happier with this purchase! It works exactly as advertised and has made my life so much easier.
-
J***
25-11-2024The product is okay, but it could be improved.
-
B***
23-11-2024I’m very impressed with the performance of this product. It’s efficient, easy to use, and exactly what I needed.
-
Q***
22-11-2024Very good product, I will buy again
-
B***
18-11-2024This product is exactly what I was looking for. It’s durable, practical, and very easy to use. A great buy!
-
I***
12-11-2024The service is very good, I like it very much
-
D***
09-11-2024This product is excellent! It meets all of my expectations and works just as described. I’m very satisfied with the quality and performance. Highly recommend it to others!
-
T***
16-09-2023I'm a cutting enthusiast and I want a 20W cutting machine to do some fun things. The machine arrived quickly and assembly was easy following the instructions. Connected to the LightBurn software, you can find many easy-to-operate items in the APP. I think it's perfect for metal engraving, and the engravings are colorful, which I really like.
-
H***
16-09-2023I compared between atomstack and xtool and finally chose ATOMSTACK X20 Pro. I was not disappointed when I received the machine. Its user interface is very friendly and the application setting is very convenient. Even if it is your first time to contact the cutting machine, you can learn it quickly by following the instructions and operation videos. It has to be said that the Atomstack laser is the most powerful diode laser on the market, that’s for sure! <o
-
H***
16-09-2023I am a DIY creator and I have been looking for a laser engraving machine that is easy to operate and cost-effective. I looked at many products and reviews on Facebook and YouTube and finally chose ATOMSTACK. Assembly was easy and took about 20 minutes. If you are familiar with LightBurn software, then you will have an easier time navigating this machine.
Related products
Creality Official Air Assist Kit for Laser Falcon 10W Laser Cutter and Engraver Pump Air Compressor
5Pcs Creality CR Laser Falcon Protective Lens Suitable for Creality Falcon Laser Module 5W/10W
Algolaser 30L Air Pump ALAP-30L1.0 Air Assist Auxiliary Laser Engraver Accessory
LONGER Lightburn Camera High 5MP Positioning and Recording 740x560mm Photography Range
Creality Falcon Smoke Purifier Filter Replacement 3in1 Design for Efficient Purify Up to 99.97% Purification Rate
