Algolaser DIY Kit 20W Laser Engraver 12000mm/min High Speed
-
iPad
$249.00
High Accuracy & High Speed: Smaller laser spot (0.15mmx0.12mm) with fine lines meets your requirement for details on your work. Up to 12000 mm/min speed is fast enough to supplement your business orders. Provides 400x400mm large work area to full fill your great creativity.
Real Offline Control: The 20W DIY KIT laser engraver supports 2.4G WiFi and USB-C connections. For beginners, AlgoLaser App. LightBurn, and LaserGRBL software provide easy access to offline control and engraving.
Upgraded Motherboard:Thanks to the motherboard's screen structure, the machine can be controlled with an external smart screen. Besides, the Smart I/O interface can be linked to the external Smart HUB, promoting smart air pump, smart protection box, and smart filter expansion to attain joint control automation, simple and user-friendly.
7 Safety Protections: Equipped with multiple detections to protect users, which including Machine Offset Detection and conservation, Machine Tilt Detection and conservation, USB Connection Detection and conservation, Beam detection and conservation, Current and Voltage Detection and conservation, Emergency Stop Switch and Key Lock.
Easy to Upgrade and Expand: The upgraded terminals of the motherboard, as well as modularization design of DIY kit, allows users to extend the existing frame and connect other accessories to achieve more possibilities.
Thoughtful Design - The assembly takes only 10~15 mins with instruction help, even for newbies. Stable body and non-slip feet support the machine to work without shifting. With few wires, proper notches and wire ties, no worry about tangled wires and misplugging.
Specification:
Model: DIY KIT 20W
Real Laser Power: ≥20000mW(20W)
Machine Power: 144W
Engraving Speed: 12,000 mm/min Max
Spot Size: 0.15mmx0.12mm
Engraving Area: X400xY400mm
Control Software: Laser GRBL (free), LightBurn (60usd/year)，AlgoLaser Mobile APP
Connection: Wifi (2.4G), TF Card(Built in 32G), USB (TYPE-C) Laser Type Diode Wave Length: 450±5nm
Focus: 5 mm from Laser Shield
Input Format: jpg, svg, png, bmp, G code, dwg, etc.
Lens Materials: Glass
Frame Materials: Aluminum Alloy
Motherboard: ALGOLASER_DIY_KIT_V1.2
Input Voltage: 100V-240V~50/60Hz
Power Adapter: Output 24V6A (6A MAX)
Available Materials of Engraving: Birch Plywood; Basswood Plywood; Eucalyptus Plywood; Pine Board; Paulownia Plank; MDF; Cherry Wood; Walnut; Colorful Acrylic (Except Blue); Cardboard; Coated Duplex Board; Leather; Colored Paper; Navy Blue Canvas; Denim; Rubber; bamboo; Coated Metal; Dry Leaves
Available Materials of Cutting: Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
Laser Module Lifetime: >10,000 Hrs
Operating Temp: -10℃ to 40℃
Product Size: 642mm*602mm*180mm
Package Size: 735mm*223mm*180mm/28.9x8.7x7in
Gross Weight: 6.5Kg/14.3lb
Packing List:
1 x Front Frame
1 x Rear Frame
1 x Left Y-Axis Frame
1 x Right Y-Axis Frame
1 x X-Axis Frame
1 x WiFi Aerial
1 x Control Box
4 x L-Bracket
4 x End Plate
1 x Limit Switch
1 x Limit Switch Mounting Plate
4 x Screw M5X8
15 x Screw M5X14
5 x Screw M5X25
4 x Screw M2.5X9
4 x M5X15X1
1 x Washer Brush
1 x Screwdriver
1 x Wrench
1 x M2.0 Allen Key
1 x M2.5 Allen Key
1 x M3.0 Allen Key
1 x Laser Goggle
4 x Support Foot
1 x USB Cable
1 x Power Adapter
1 x Power Cable
2 x Timing Belt
1 x Machine Key Set
1 x Laser Module Cable
1 x ALM-20BD(20W) Laser Module
1 x Focus Assist
2 x Thumb Screw
1 x Air Pipe
1 x Air Pipe
1 x AlgoLaser Air pump(AAP 1.0)
1 x Plywood
1 x Acrylic
3 x Metal Card
3 x Cable Ties
-
M***
11-12-2024Highly satisfied with this product. It’s well-made, and I would recommend it to anyone.
-
D***
09-12-2024I couldn't be happier with this purchase! It works exactly as advertised and has made my life so much easier.
-
C***
08-12-2024Amazing product! The quality is fantastic, and it has exceeded all of my expectations. Would definitely buy again.
-
Z***
03-12-2024very good.
-
Q***
29-11-2024I’m very impressed with the performance of this product. It’s efficient, easy to use, and exactly what I needed.
-
I***
17-11-2024The service is very good, I like it very much
-
M***
17-11-2024This product has exceeded my expectations in every way. The quality is fantastic, and it does exactly what it promises.
-
F***
13-11-2024I absolutely love this product! exactly what i need.
-
P***
10-11-2024This product has exceeded my expectations in every way. The quality is fantastic, and it does exactly what it promises.
-
N***
06-11-2024This product is okay.
-
C***
01-11-2024This product has exceeded my expectations in every way. The quality is fantastic, and it does exactly what it promises.
-
B***
17-04-2024Very good product, well packaged. The 20W laser power can meet my current work needs, the price is reasonable, and it is highly recommended to people with a low budget.
-
Q***
07-04-2024This 20W DIY KIT laser engraving machine is excellent, with a reasonable overall design, no excessive exposed wires, and neat storage. Even for a novice, it takes about 20 minutes to assemble according to the instructions. Connecting LightBurn and LaserGRBL software allows easy offline control and engraving, and the operation process is also simple. Overall, a great laser.
Related products
Creality Official Air Assist Kit for Laser Falcon 10W Laser Cutter and Engraver Pump Air Compressor
5Pcs Creality CR Laser Falcon Protective Lens Suitable for Creality Falcon Laser Module 5W/10W
Algolaser 30L Air Pump ALAP-30L1.0 Air Assist Auxiliary Laser Engraver Accessory
LONGER Lightburn Camera High 5MP Positioning and Recording 740x560mm Photography Range
Creality Falcon Smoke Purifier Filter Replacement 3in1 Design for Efficient Purify Up to 99.97% Purification Rate
